立邁電子
專注電容器行業十多年
電話①：13336555866
電話②：13632675169
Q Q①：1994168062
Q Q②：358889264
郵箱：jimmy@limak.cn
地址：廣東省東莞市塘廈鎮東興路162號振興大廈
低阻抗品
適用于 -55 ~ +105°C 的溫度范圍
Load life of 1000 ~ 2000 hours
Comply with the RoHS directive
符合 RoHS 指令
| Items 項目 | Characteristics 主要特性 | |||||||||||||||||||||||||||||||||||||||||
| Operation Temperature Range 使用溫度范圍 | -55 ~ +105°C | |||||||||||||||||||||||||||||||||||||||||
| Voltage Range 額定工作電壓范圍 | 6.3 ~ 50V | |||||||||||||||||||||||||||||||||||||||||
| Capacitance Range 靜電容量范圍 | 1 ~ 4700μF | |||||||||||||||||||||||||||||||||||||||||
| Capacitance Tolerance 靜電容量允許偏差 | ±20% at 120Hz, 20°C | |||||||||||||||||||||||||||||||||||||||||
| Leakage Current 漏電流 |
Leakage current (Ø4~Ø10) ≦0.01CV or 3μA, whichever is greater (after 2 minutes application of rated voltage) Leakage current (Ø12.5~Ø16) ≦0.03CV or 4μA, whichever is greater (after 1 minute application of rated voltage) 漏電流 (Ø4~Ø10) ≦0.01CV 或 3μA，取較大值（施加額定工作電壓 2 分鐘后） 漏電流 (Ø12.5~Ø16) ≦0.03CV 或 4μA，取較大值（施加額定工作電壓 1 分鐘后） |
|||||||||||||||||||||||||||||||||||||||||
| Dissipation Factor (tan ?δ) 損耗角正切 |
Measurement frequency 測試頻率: 120Hz, Temperature 溫度: 20°C
|
|||||||||||||||||||||||||||||||||||||||||
| Stability at Low Temperature 低溫特性 |
Measurement frequency 測試頻率: 120Hz
|
|||||||||||||||||||||||||||||||||||||||||
| Load Life 高溫負荷特性 |
After 2000 hrs. (1000 hrs. for Ø4~Ø6.3×5.4) application of the rated voltage at 105°C, they meet the characteristics listed
below. 在 105°C 環境中施加額定工作電壓 2000 小時（Ø4~Ø6.3×5.4 為 1000 小時）后，電容器的特性符合下表的要求。
|
|||||||||||||||||||||||||||||||||||||||||
| Shelf Life 高溫貯存特性 |
After leaving capacitors under no load at 105°C for 1000 hours,they meet the specified value for load life characteristics listed above.
在 105°C 環境中無負荷放置 1000 小時后，電容器的特性符合高溫負荷特性中所列的規定值。
|
|||||||||||||||||||||||||||||||||||||||||
| Resistance to Soldering Heat 耐焊接熱特性 |
After reflow soldering and restored at room temperature, they meet the characteristics listed below.
經過回流焊并冷卻至室溫后，電容器的特性符合下表的要求。
|
|||||||||||||||||||||||||||||||||||||||||
| Marking 標示 | Black print on the case top.鋁殼頂部黑字印刷。 | |||||||||||||||||||||||||||||||||||||||||
DRAWING (Unit: mm) 外形圖
DIMENSIONS (Unit: mm) 尺寸表
| ØD × L | 4 × 5.4 | 5 × 5.4 | 6.3 × 5.4 | 6.3 × 7.7 | 8 × 6.2 | 8 × 10.5 | 10 × 10.5 | 10 × 13.5 | 12.5 × 13.5 | 12.5 × 16 | 16 × 16.5 |
| A | 1.8 | 2.1 | 2.5 | 2.5 | 3.3 | 2.9 | 3.2 | 3.2 | 4.7 | 4.7 | 5.5 |
| B | 4.3 | 5.3 | 6.6 | 6.6 | 8.3 | 8.3 | 10.3 | 10.3 | 13.0 | 13.0 | 17.0 |
| C | 4.3 | 5.3 | 6.6 | 6.6 | 8.3 | 8.3 | 10.3 | 10.3 | 13.0 | 13.0 | 17.0 |
| E ± 0.2 | 1.0 | 1.3 | 2.2 | 2.2 | 2.2 | 3.1 | 4.4 | 4.4 | 4.4 | 4.4 | 6.7 |
| L | 5.4 | 5.4 | 5.4 | 7.7 | 6.2 | 10.5 | 10.5 | 13.5 | 13.5 | 16.0 | 16.5 |
DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT / 規格尺寸及最大允許紋波電流
 |
6.3 | 10 | 16 | |||||||
| 0J | 1A | 1C | ||||||||
| 10 | 100 | 4 x 5.4 | 3.0 | 60 | ||||||
| 15 | 150 |
5 x 5.4
(4 x 5.4)
|
1.8
(3.0)
|
95
(60)
|
||||||
| 22 | 220 | 4 x 5.4 | 3.0 | 60 |
5 x 5.4
(4 x 5.4)
|
1.8
(3.0)
|
95
(60)
|
5 x 5.4
(4 x 5.4)
|
1.8
(3.0)
|
95
(60)
|
| 33 | 330 |
5 x 5.4
(4 x 5.4)
|
1.8
(3.0)
|
95
(60)
|
5 x 5.4
(4 x 5.4)
|
1.8
(3.0)
|
95
(60)
|
6.3 x 5.4
(5 x 5.4)
|
1.0
(1.8)
|
140
(95)
|
| 47 | 470 |
5 x 5.4
(4 x 5.4)
|
1.8
(3.0)
|
95
(60)
|
6.3 x 5.4
(5 x 5.4)
|
1.0
(1.8)
|
140
(95)
|
6.3 x 5.4
(5 x 5.4)
|
1.0
(1.8)
|
140
(95)
|
| 68 | 680 |
6.3 x 5.4
(5 x 5.4)
|
1.0
(1.8)
|
140
(95)
|
6.3 x 5.4 | 1.0 | 140 |
6.3 x 7.7
(6.3 x 5.4)
|
0.6
(1.0)
|
230
(140)
|
| 100 | 101 |
6.3 x 5.4
(5 x 5.4)
|
1.0
(1.8)
|
140
(95)
|
6.3 x 7.7
(6.3 x 5.4)
|
0.6
(1.0)
|
230
(140)
|
6.3 x 7.7
(6.3 x 5.4)
|
0.6
(1.0)
|
230
(140)
|
| 150 | 151 |
6.3 x 7.7
(6.3 x 5.4)
|
0.6
(1.0)
|
230
(140)
|
6.3 x 7.7
(6.3 x 5.4)
|
0.6
(1.0)
|
230
(140)
|
6.3 × 7.7 | 0.6 | 230 |
| 220 | 221 |
6.3 x 7.7
(6.3 x 5.4)
|
0.6
(1.0)
|
230
(140)
|
6.3 × 7.7 |
0.6 |
230 |
8 x 10.5
(6.3 x 7.7)
|
0.30
(0.6)
|
450 (230) |
| 330 | 331 | 6.3 × 7.7 | 0.6 | 230 | 8 x 10.5 | 0.30 | 450 |
10 x 10.5
(8 x 10.5)
|
0.15
(0.30)
|
670 (450) |
| 470 | 471 | 8 × 10.5 | 0.30 | 450 |
8 x 10.5 |
0.30 |
450 |
10 x 10.5
(8 x 10.5)
|
0.15
(0.30)
|
670 (450) |
| 680 | 681 | 8 × 10.5 | 0.30 | 450 | 10 x 10.5 | 0.15 | 670 | 10 × 10.5 | 0.15 | 670 |
| 1000 | 102 |
10 x 10.5
(8 x 10.5)
|
0.15
(0.30)
|
670
(450)
|
10 x 10.5 |
0.15 |
670 |
10 x 10.5 |
0.15 |
670 |
| 1500 | 152 |
10 × 13.5
(10 × 10.5)
|
0.13
(0.15)
|
750
(670)
|
12.5 × 13.5
(10 × 13.5)
|
0.11
(0.13)
|
820 (750) |
12.5 × 13.5 | 0.11 | 820 |
| 2200 | 222 |
12.5 × 13.5
(10 × 13.5)
|
0.11
(0.13)
|
820
(750)
|
12.5 × 16 |
0.09 |
950 |
16 × 16.5
(12.5 × 16)
|
0.08 (0.09) |
1260 (950) |
| 3300 | 332 |
12.5 × 16
(12.5 × 13.5)
|
0.09
(0.11)
|
950
(820)
|
16 × 16.5 |
0.08 |
1260 | 16 × 16.5 | 0.08 | 1260 |
| 4700 | 472 | 16 × 16.5 | 0.08 | 1260 | 16 × 16.5 | 0.08 | 1260 | |||
|
|
25 | 35 | 50 | |||||||
| 1E | 1A | 1H | ||||||||
| 1 | 010 | 4 × 5.4 | 3.0 | 60 | 4 × 5.4 | 5.0 | 30 | |||
| 0.15 | 1R5 | 4 × 5.4 | 3.0 | 60 | 4 × 5.4 | 5.0 | 30 | |||
| 2.2 | 2R2 | 4 x 5.4 | 3.0 | 60 |
4 × 5.4 |
5.0 |
30 | |||
| 3.3 | 3R3 |
|
|
4 x 5.4 |
3.0 |
60 |
4 × 5.4 |
5.0 |
30 | |
| 4.7 | 4R7 | 4 x 5.4 | 3.0 | 60 | 4 x 5.4 | 3.0 | 60 | 5 x 5.4 | 3.0 | 50 |
| 6.8 | 6R8 | 4 x 5.4 | 3.0 | 60 | 5 x 5.4 | 1.8 | 95 | 6.3 x 5.4 | 2.0 | 70 |
| 10 | 100 |
5 x 5.4
(4 x 5.4)
|
1.8
(3.0)
|
95 (60) |
5 x 5.4
(4 x 5.4)
|
1.8
(3.0)
|
95 (60) |
6.3 x 5.4 | 2.0 | 70 |
| 15 | 150 | 6.3 x 5.4 | 1.8 | 95 | 5 x 5.4 | 1.8 | 95 | 6.3 x 5.4 | 2.0 | 70 |
| 22 | 220 |
6.3 x 5.4
(5 x 5.4)
|
1.0
(1.8)
|
140 (95) |
6.3 x 5.4
(5 x 5.4)
|
1.0
(1.8)
|
140 (95) |
6.3 x 7.7
(6.3 x 5.4)
|
1.0 (2.0) |
120 (70) |
| 33 | 330 |
6.3 x 5.4
(5 x 5.4)
|
1.0
(1.8)
|
140 (95) |
6.3 x 5.4 |
1.0
|
140 | 6.3 x 7.7 | 1.0 | 120 |
| 47 | 470 |
6.3 x 7.7
(6.3 x 5.4)
|
0.6
(1.0)
|
230 (140) |
6.3 x 7.7
(6.3 x 5.4)
|
0.60
(1.0)
|
230 (140) |
6.3 x 7.7 |
1.0
|
120 |
| 68 | 680 | 6.3 x 7.7 | 0.6 | 230 |
6.3 x 7.7 |
0.60 |
230 | 8 x 10.5 | 0.60 | 300 |
| 100 | 101 | 6.3 x 7.7 | 0.6 | 230 |
8 x 10.5
(6.3 x 7.7)
|
0.30 (0.6) |
450 (260) |
8 x 10.5 | 0.60 | 300 |
| 150 | 151 |
8 x 10.5
(6.3 x 7.7)
|
0.30 (0.6) |
450 (230) |
8 x 10.5 | 0.30 | 450 | 10 x 10.5 | 0.30 | 500 |
| 220 | 221 | 8 x 10.5 | 0.30 | 450 |
10 x 10.5
(8 x 10.5)
|
0.15
(0.30)
|
670 (450) |
10 x 10.5 | 0.30 | 500 |
| 330 | 331 |
10 x 10.5
(8 x 10.5)
|
0.15 (0.30) |
670 (450) |
10 x 10.5 | 0.15 | 670 |
16 × 16.5
(12.5 × 13.5)
(10 × 13.5)
|
0.12
(0.20)
(0.25)
|
1060
(650)
(580)
|
| 470 | 471 | 10 x 10.5 | 0.15 | 670 | 10 x 10.5 | 0.15 | 670 |
16 × 16.5
(12.5 × 16)
|
0.12
(0.15)
|
1060
(700)
|
| 680 | 681 | 10 x 13.5 | 0.13 | 750 |
12.5 × 13.5
(10 × 13.5)
|
0.11 (0.13) |
820 (750) |
16 × 16.5 | 0.12 | 1060 |
| 1000 | 102 |
16 × 16.5
(12.5 × 13.5)
|
0.08 (0.11) |
1260 (820) |
16 × 16.5
(12.5 × 16)
|
0.08 (0.09) |
1260 (950) |
|||
| 1500 | 152 | 12.5 × 16 | 0.09 | 950 | 16 × 16.5 | 0.08 | 1260 | |||
| 2200 | 222 | 16 × 16.5 | 0.08 | 1260 |
Case size
ØD×L(mm)
尺寸
|
Impedance (Ω) at
20°C 100KHz
阻抗值
|
Ripple current
(mA rms) at 105°C
100KHz
紋波電流
|
|||
FREQUENCY COEFFICIENT OF ALLOWABLE RIPPLE CURRENT / 紋波電流頻率補償系數
|
Frequency 頻率 |
50Hz |
120Hz |
300Hz |
1KHz |
10KHz~ |
||
|
Coefficient 系數 |
Ø4 ~ Ø10 |
1 ~ 68μF |
0.35 |
0.50 |
0.64 |
0.83 |
1.00 |
|
100 ~ 2200μF |
0.40 |
0.55 |
0.70 |
0.85 |
1.00 |
||
|
Ø12.5 ~ Ø16 |
~ 680μF |
0.45 |
0.65 |
0.80 |
0.90 |
1.00 |
|
|
1000 ~ 4700μF |
0.65 |
0.85 |
0.95 |
1.00 |
1.00 |
||
NOTE: All designs and specifications are for reference only and are subject to change without prior notice. If any doubt about safety for your application, please
contact us immediately for technical assistance before purchase.
注: 以上所提供的設計及特性參數僅供參考，任何修改不作預先通知。如果在使用上有疑問，請在采購前與我們聯系，以便提供技術上的協助。
傳真：0769-82866319
Q Q：1994168062
公司地址：廣東省東莞市塘廈鎮東興路162號振興大廈
-----------------------------------------------------
發布編輯：貼片鋁電解電容-東莞市立邁電子有限公司（以下簡稱“立邁電子”）
本文由立邁電子整理編輯，如果您還想了解更多關于貼片鋁電解電容規格的文章請點擊查看，轉發請注明來源及版權歸屬。
-----------------------------------------------------
貼片鋁電解電容品牌： VT貼片鋁電解電容 - ST貼片鋁電解電容【有保障、有品質、有服務的貼片鋁電解電容廠家就找東莞市立邁電子有限公司】
詳情訪問官網：www.999yisheng.com 品質保障、交期不延時、售后無憂、免費送樣品！
Copyright 2020© 東莞市立邁電子有限公司 版權所有 粵ICP備2020136922號-1
24小時服務電話：13336555866 郵箱：jimmy@limak.cn
公司地址：廣東省東莞市塘廈鎮東興路162號振興大廈 網站地圖
在線客服①
